RS Fan Filter Units
RS Fan Filter Units
Fan Filter Unit, consisting of separate HEPA filter and attached fan housing made of aluminum.
- The degree of cleanliness from class 1 up to 100,000 can be set and it can be set at individual area.
- Because the back in the ceiling is a low-pressure area, the potential of the leakage is extremely low.
- Bay method or through the wall method is possible by the arrangement of layout of FFU.
- The volume of the air flow can be set at each area.
- Flexible increase or change of the clean room is possible by the arrangement of Fan Filter Unit.
FILTER:
– G3 prefilter
– Main filter H13, H14, U15, U16
– Filter frame made of aluminum
– Dry seal
– Protection grid on both sides
|
Overall size |
575 * 575 * 300 |
575 * 1175 * 300 |
875 * 1175 * 300 |
1175 * 1175 * 380 |
|
W * L * H (mm) |
||||
|
HEPA filter size |
570 * 570 * 69 |
570 * 1170 * 69 |
870 * 1170 * 69 |
1170 * 1170 * 69 |
|
W * L * H (mm) |
|
Efficiency |
HEPA 0.3μm@≥99.99% or ULPA 0.12@≥99.9995% |
||||
|
Prefilter (optional) |
Washable non-woven fabric |
||||
|
Construction |
Electrical galvanized metal sheet or stainless steel or high quality aluminum sheet |
||||
|
Air velocity (m/s) |
0.35~0.45 |
0.35~0.45 |
0.35~0.45 |
0.35~0.45 |
|
|
Air flow (CMH) |
410~513 |
840~1080 |
1290~1650 |
1720~2160 |
|
|
Speed control |
3 modes, 5 modes, or induction control |
||||
|
Noise (dB) |
48 ~ 50 |
48 ~ 52 |
50 ~ 56 |
52 ~ 58 |
|
|
Consumption(w) |
AC |
≤ 98 |
≤ 150 |
≤ 180 |
≤200 |
|
DC |
≤ 65 |
≤ 90 |
≤ 130 |
≤160 |
|
|
Power |
AC single phase 110/220V OR three phase 220/380V 50/60Hz Or DC 220V |
||||
|
Overload protection |
Equipped |
||||
|
Weight (KG) |
28 |
40 |
47 |
55 |
|